2.10. ioctls CEC_G_MODE and CEC_S_MODE

CEC_G_MODE, CEC_S_MODE - Get or set exclusive use of the CEC adapter

2.10.1. Synopsis

CEC_G_MODE

int ioctl(int fd, CEC_G_MODE, __u32 *argp)

CEC_S_MODE

int ioctl(int fd, CEC_S_MODE, __u32 *argp)

2.10.2. Arguments

fd

File descriptor returned by open().

argp

Pointer to CEC mode.

2.10.3. Description

By default any filehandle can use ioctls CEC_RECEIVE and CEC_TRANSMIT, but in order to prevent applications from stepping on each others toes it must be possible to obtain exclusive access to the CEC adapter. This ioctl sets the filehandle to initiator and/or follower mode which can be exclusive depending on the chosen mode. The initiator is the filehandle that is used to initiate messages, i.e. it commands other CEC devices. The follower is the filehandle that receives messages sent to the CEC adapter and processes them. The same filehandle can be both initiator and follower, or this role can be taken by two different filehandles.

When a CEC message is received, then the CEC framework will decide how it will be processed. If the message is a reply to an earlier transmitted message, then the reply is sent back to the filehandle that is waiting for it. In addition the CEC framework will process it.

If the message is not a reply, then the CEC framework will process it first. If there is no follower, then the message is just discarded and a feature abort is sent back to the initiator if the framework couldn’t process it. If there is a follower, then the message is passed on to the follower who will use ioctl CEC_RECEIVE to dequeue the new message. The framework expects the follower to make the right decisions.

The CEC framework will process core messages unless requested otherwise by the follower. The follower can enable the passthrough mode. In that case, the CEC framework will pass on most core messages without processing them and the follower will have to implement those messages. There are some messages that the core will always process, regardless of the passthrough mode. See Core Message Processing for details.

If there is no initiator, then any CEC filehandle can use ioctl CEC_TRANSMIT. If there is an exclusive initiator then only that initiator can call ioctls CEC_RECEIVE and CEC_TRANSMIT. The follower can of course always call ioctl CEC_TRANSMIT.

Available initiator modes are:

Initiator Modes

CEC_MODE_NO_INITIATOR

0x0

This is not an initiator, i.e. it cannot transmit CEC messages or make any other changes to the CEC adapter.

CEC_MODE_INITIATOR

0x1

This is an initiator (the default when the device is opened) and it can transmit CEC messages and make changes to the CEC adapter, unless there is an exclusive initiator.

CEC_MODE_EXCL_INITIATOR

0x2

This is an exclusive initiator and this file descriptor is the only one that can transmit CEC messages and make changes to the CEC adapter. If someone else is already the exclusive initiator then an attempt to become one will return the EBUSY error code error.

Available follower modes are:

Follower Modes

CEC_MODE_NO_FOLLOWER

0x00

This is not a follower (the default when the device is opened).

CEC_MODE_FOLLOWER

0x10

This is a follower and it will receive CEC messages unless there is an exclusive follower. You cannot become a follower if CEC_CAP_TRANSMIT is not set or if CEC_MODE_NO_INITIATOR was specified, the EINVAL error code is returned in that case.

CEC_MODE_EXCL_FOLLOWER

0x20

This is an exclusive follower and only this file descriptor will receive CEC messages for processing. If someone else is already the exclusive follower then an attempt to become one will return the EBUSY error code. You cannot become a follower if CEC_CAP_TRANSMIT is not set or if CEC_MODE_NO_INITIATOR was specified, the EINVAL error code is returned in that case.

CEC_MODE_EXCL_FOLLOWER_PASSTHRU

0x30

This is an exclusive follower and only this file descriptor will receive CEC messages for processing. In addition it will put the CEC device into passthrough mode, allowing the exclusive follower to handle most core messages instead of relying on the CEC framework for that. If someone else is already the exclusive follower then an attempt to become one will return the EBUSY error code. You cannot become a follower if CEC_CAP_TRANSMIT is not set or if CEC_MODE_NO_INITIATOR was specified, the EINVAL error code is returned in that case.

CEC_MODE_MONITOR_PIN

0xd0

Put the file descriptor into pin monitoring mode. Can only be used in combination with CEC_MODE_NO_INITIATOR, otherwise the EINVAL error code will be returned. This mode requires that the CEC_CAP_MONITOR_PIN capability is set, otherwise the EINVAL error code is returned. While in pin monitoring mode this file descriptor can receive the CEC_EVENT_PIN_CEC_LOW and CEC_EVENT_PIN_CEC_HIGH events to see the low-level CEC pin transitions. This is very useful for debugging. This mode is only allowed if the process has the CAP_NET_ADMIN capability. If that is not set, then the EPERM error code is returned.

CEC_MODE_MONITOR

0xe0

Put the file descriptor into monitor mode. Can only be used in combination with CEC_MODE_NO_INITIATOR, otherwise the EINVAL error code will be returned. In monitor mode all messages this CEC device transmits and all messages it receives (both broadcast messages and directed messages for one its logical addresses) will be reported. This is very useful for debugging. This is only allowed if the process has the CAP_NET_ADMIN capability. If that is not set, then the EPERM error code is returned.

CEC_MODE_MONITOR_ALL

0xf0

Put the file descriptor into ‘monitor all’ mode. Can only be used in combination with CEC_MODE_NO_INITIATOR, otherwise the EINVAL error code will be returned. In ‘monitor all’ mode all messages this CEC device transmits and all messages it receives, including directed messages for other CEC devices, will be reported. This is very useful for debugging, but not all devices support this. This mode requires that the CEC_CAP_MONITOR_ALL capability is set, otherwise the EINVAL error code is returned. This is only allowed if the process has the CAP_NET_ADMIN capability. If that is not set, then the EPERM error code is returned.

Core message processing details:

Core Message Processing

CEC_MSG_GET_CEC_VERSION

The core will return the CEC version that was set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead.

CEC_MSG_GIVE_DEVICE_VENDOR_ID

The core will return the vendor ID that was set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead.

CEC_MSG_ABORT

The core will return a Feature Abort message with reason ‘Feature Refused’ as per the specification, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead.

CEC_MSG_GIVE_PHYSICAL_ADDR

The core will report the current physical address, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead.

CEC_MSG_GIVE_OSD_NAME

The core will report the current OSD name that was set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing and this message has to be handled by a follower instead.

CEC_MSG_GIVE_FEATURES

The core will do nothing if the CEC version is older than 2.0, otherwise it will report the current features that were set with ioctl CEC_ADAP_S_LOG_ADDRS, except when in passthrough mode. In passthrough mode the core does nothing (for any CEC version) and this message has to be handled by a follower instead.

CEC_MSG_USER_CONTROL_PRESSED

If CEC_CAP_RC is set and if CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU is set, then generate a remote control key press. This message is always passed on to the follower(s).

CEC_MSG_USER_CONTROL_RELEASED

If CEC_CAP_RC is set and if CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU is set, then generate a remote control key release. This message is always passed on to the follower(s).

CEC_MSG_REPORT_PHYSICAL_ADDR

The CEC framework will make note of the reported physical address and then just pass the message on to the follower(s).

2.10.4. Return Value

On success 0 is returned, on error -1 and the errno variable is set appropriately. The generic error codes are described at the Generic Error Codes chapter.

The ioctl CEC_S_MODE can return the following error codes:

EINVAL

The requested mode is invalid.

EPERM

Monitor mode is requested, but the process does have the CAP_NET_ADMIN capability.

EBUSY

Someone else is already an exclusive follower or initiator.