LCOV - code coverage report

Current view: top level - drivers/tty/serial/8250 - 8250_port.c (source / functions) Hit Total Coverage Test: landlock.info Lines: 482 1250 38.6 % Date: 2021-04-22 12:43:58 Functions: 42 101 41.6 %

Function Name	Hit count
__do_stop_tx	208
__start_tx	397
__stop_tx	208
__stop_tx_rs485	0
autoconfig	4
autoconfig_8250	0
autoconfig_irq	0
bytes_to_fcr_rxtrig	0
default_serial_dl_read	0
default_serial_dl_write	2
do_get_rxtrig	0
do_serial8250_get_rxtrig	0
do_serial8250_set_rxtrig	0
do_set_rxtrig	0
handle_rx_dma	0
hub6_serial_in	0
hub6_serial_out	0
io_serial_in	16989
io_serial_out	24487
mem16_serial_in	0
mem16_serial_out	0
mem32_serial_in	0
mem32_serial_out	0
mem32be_serial_in	0
mem32be_serial_out	0
mem_serial_in	0
mem_serial_out	0
probe_baud	0
rx_trig_bytes_show	0
rx_trig_bytes_store	0
serial8250_break_ctl	0
serial8250_clear_and_reinit_fifos	0
serial8250_clear_fifos	2
serial8250_compute_lcr	2
serial8250_config_port	4
serial8250_console_exit	0
serial8250_console_putchar	13683
serial8250_console_restore	0
serial8250_console_setup	1
serial8250_console_write	256
serial8250_default_handle_irq	1129
serial8250_disable_ms	0
serial8250_do_get_divisor	2
serial8250_do_get_mctrl	0
serial8250_do_pm	0
serial8250_do_set_divisor	2
serial8250_do_set_ldisc	0
serial8250_do_set_mctrl	5
serial8250_do_set_termios	2
serial8250_do_shutdown	0
serial8250_do_startup	1
serial8250_em485_config	0
serial8250_em485_destroy	0
serial8250_em485_handle_start_tx	0
serial8250_em485_handle_stop_tx	0
serial8250_em485_init	0
serial8250_em485_start_tx	0
serial8250_em485_stop_tx	0
serial8250_enable_ms	0
serial8250_get_baud_rate	2
serial8250_get_divisor	2
serial8250_get_mctrl	0
serial8250_handle_irq	1129
serial8250_init_port	4
serial8250_modem_status	750
serial8250_pm	1
serial8250_read_char	0
serial8250_release_port	0
serial8250_release_std_resource	3
serial8250_request_port	0
serial8250_request_std_resource	4
serial8250_rpm_get	0
serial8250_rpm_get_tx	397
serial8250_rpm_put	0
serial8250_rpm_put_tx	208
serial8250_rx_chars	0
serial8250_set_defaults	4
serial8250_set_divisor	2
serial8250_set_ldisc	0
serial8250_set_mctrl	5
serial8250_set_sleep	1
serial8250_set_termios	2
serial8250_shutdown	0
serial8250_start_tx	397
serial8250_startup	1
serial8250_stop_rx	0
serial8250_stop_tx	0
serial8250_throttle	0
serial8250_tx_chars	750
serial8250_tx_empty	135
serial8250_tx_threshold_handle_irq	0
serial8250_type	1
serial8250_unthrottle	0
serial8250_update_uartclk	0
serial8250_verify_port	0
serial_icr_write	0
serial_port_out_sync	2
set_io_from_upio	4
start_hrtimer_ms	0
start_tx_rs485	0
wait_for_xmitr	13940

Generated by: LCOV version 1.14